2-Port Multichannel T3 Port Adapter PA-MC-T3
Currently unavailable
| The Cisco’s 1-Port T3 Port Adapter Module is a single-width port adapter that provides one T3 interface connection using BNC connectors. The interface can provide up to 28 T1 lines (a single T3 group). Each T1 line is presented to the system as a serial interface that can be configured individually. | |
| GENERAL INFORMATION | |
| Manufacturer | Cisco Systems, Inc |
| Manufacturer Part Number | PA-MC-T3 |
| Brand Name | Cisco |
| Product Model | PA-MC-T3 |
| Product Name | 2-Port Multichannel T3 Port Adapter |
| Product Type | Port Adapter |
| INTERFACES / PORTS | |
| Interfaces/Ports | 1 x T3 WAN |
| Interfaces/Ports Details | 1 x BNC Connector Multi-channel T3 Full-duplex |
| Interfaces/Ports Details | 28 x Channel T1 WAN |
| MEDIA & PERFORMANCE | |
| Connectivity Media | RG-59 Coaxial |
| Distance Supported | 450 ft 728A or Equivalent Coaxial |
| Data Transfer Rate | 44.736Mbps T3 |
| MANAGEMENT & PROTOCOLS | |
| Protocols | |
| • PPP • Frame Relay • HDLC |
|
| CONTROL / INDICATORS | |
| Status Indicators | |
| One row of six status LEDs | |
| • ALARM • LOOP • LOS • OOF • AIS • FERF • One Enabled LED |
|
| COMPATIBILITY | |
| • Catalyst RSM/VIP2 • Catalyst 6000 Family FlexWAN Module • Cisco 7200 Series and Cisco uBR7200 Series Routers • Cisco 7301 Router • Cisco 7304 PCI Port Adapter Carrier Card • Cisco 7401ASR Router • Catalyst RSM/VIP2 • Catalyst 6000 Family FlexWAN Module • Cisco 7200 Series and Cisco uBR7200 Series Routers • Cisco 7301 Router • Cisco 7304 PCI Port Adapter Carrier Card • Cisco 7401ASR Router |
|
| MISCELLANEOUS | |
| The PA-MC-T3 contains the following features: | |
| PA-MC-T3 microcode is loaded into and operates from DRAM (or SDRAM) configuration is determined by the VIP model on which the PA-MC-T3 is installed | |
| On the Catalyst RSM/VIP2, PA-MC-T3 microcode is loaded into and operates from DRAM on the Catalyst RSM/VIP2-40 | |
| Specification for the T3 Front End: | |
| Line rate | 44.736 Mbps (plus/minus 20 ppm) |
| Line code | B3ZS (bipolar with three-zero substitution) |
| Impedance | 75 ohms |
| Pulse shape | ANSI T1.102, pulse amplitude is between 0.36 and 0.85 volts (V) peak |
| Input signal | DSX-3 (9.7 dB to -11.8 dB) |
| Output signal | DSX-3, able to drive 450 feet (135 meters) of 75-ohm coaxial cable (728A or equivalent) and meet pulse shape template at the line side |
| _______________________ | |